[. . . ] 4-408-052-51(1) FM/MW/LW Digital Media Player FM/MW/LW Digital Media Player Operating Instructions GB Bedienungsanleitung Mode d’emploi Istruzioni per l’uso Gebruiksaanwijzing DE FR IT NL To cancel the demonstration (DEMO) display, see page 5. DSX-A30 Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/connections manual. Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. [. . . ] If you use the BTM function, only RDS stations are stored with the same AF/TA setting. If you preset manually, you can preset both RDS and non-RDS stations with the AF/TA setting for each. Selecting PTY (Program Types) Displays the currently received program type. The current program type name appears if the station is transmitting PTY data. 11 2 Rotate the control dial until the desired program type appears, then press it. The unit starts to search for a station broadcasting the selected program type. USB devices • MSC (Mass Storage Class)-type USB devices compliant with the USB standard can be used. For details on the compatibility of your USB device, visit the support site on the back cover. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine. Music), LIGHT M (Light classical), CLASSICS (Serious classical), OTHER M (Other Music), WEATHER (Weather), FINANCE (Finance), CHILDREN (Children’s program), SOCIAL A (Social Affairs), RELIGION (Religion), PHONE IN (Phone In), TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz Music), COUNTRY (Country Music), NATION M (National Music), OLDIES (Oldies Music), FOLK M (Folk Music), DOCUMENT (Documentary) Playing back a USB device 1 Open the USB cover, then connect the USB device to the USB connector with its USB cable. Setting CT (Clock Time) The CT data from the RDS transmission sets the clock. Note The CT function may not work properly even though an RDS station is being received. 12 If a USB device is already connected, to start playback, press  repeatedly until “USB” appears. to stop playback , press and hold  for 1 second. To remove the USB device, stop the USB playback, then remove the USB device. Note Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. * During playback, press (BROWSE) for more than 2 seconds to directly return to the beginning of the category list (USB only). 3 4 2 3 Rotate the control dial to select the desired search category, then press it to confirm. Sound Settings and Setup Menu Changing the sound settings Adjusting the sound characteristics 1 2 3 4 During reception/playback, press the select button. Rotate the control dial until the desired menu item appears, then press it. ” AUX VOL*2 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: “+18 dB” – “0 dB” – “–8 dB. ” This setting negates the need to adjust the volume level between sources. [. . . ]  The power supply lead or battery has been disconnected or it is not connected properly.  The leads are not matched correctly with the car’s accessory power connector.  If no operation is performed for 5 minutes with “DEMO-ON” set, demonstration mode starts. – Press  on the unit until the display appears. [. . . ]